 |
Opamp Technical Books 1033 N. Sycamore Ave. Los Angeles, CA 90038 WWW.OPAMP.COM 1 - 800 - 468 - 4322 8:00am-4:30pm M-F 9:00am-5:30pm Sat |
|
|---|
 |
 |
 |
 |
 |
 |
 |
Keywords: boiler
Your search found 62 books Now viewing Books 1 - 25 In stock items ship IMMEDIATELY. Other titles usually ship within 2-3 days. |
 |
|---|
| ASME BOILER & PRESSURE VESSEL CODE 2007, Section I: Power Boilers | |||||||
|---|---|---|---|---|---|---|---|
| |||||||
| Provides requirements for all methods of construction of power, electric, & miniature boilers; high temperature water boilers used in stationary service; & power boilers used in locomotive, portable, & traction service Rules pertaining to use of the V, A, M, PP, S and E Code symbol stamps are also included. The rulse are applicable to boilers in which steam or other vapor is generated at pressures exceeding 15 psig, and high temperature water boilers intended for operation at pressures exceeding 160 psig and or temperatures exceeding 250 degrees F. Superheaters, economizers, and other pressure parts connected directly to the boiler without intervening valves are considered as part of the scope of Section 1. Contents: Requirements for: Boilers Fabricated by Welding; Boilers Fabricated by Riveting (by reference only); Watertube Boilers; Firetube Boilers; Feedwater Heaters; Miniature Boilers; Electric Boilers; Organic Fluid Vaporizer Generators. | |||||||
| ASME | S | ISBN-10: UOO010 ISBN-13: | PGS: 324 | List: 434.50 YOUR PRICE: 434.50 | |||
| ASME BOILER & PRESSURE VESSEL CODE 2007, Section II: Part A - Ferrous Material Specifications | |||||||
|---|---|---|---|---|---|---|---|
| |||||||
| Provides material specifications for ferrous materials adequate for safety in the field of pressure equipment. These specifications contain requirements and mechanical properties, test specimens, and methods of testing. They are designated by SA numbers and are derived from ASTM "A" specifications. Contents: Requirements for: Steel Pipe; Steel Tubes; Steel Flanges, Fittings, Valves & Parts; Steel Plates, Sheets & Strips for Pressure Vessels; Structural Steels; Steel Bars; Steel Bolting Materials; Steel Billets & Forgings; Steel Castings; Corrosion Resisting & Heat Resisting Steels; Wrought Iron, Cast Iron & Malleable Irons; Methods. | |||||||
| ASME | S | ISBN-10: UO002A ISBN-13: | PGS: 1500 | List: 665.50 YOUR PRICE: 665.50 | |||
| ASME BOILER & PRESSURE VESSEL CODE 2007, Section II: Part B - Nonferrous Material Specifications | |||||||
|---|---|---|---|---|---|---|---|
| |||||||
| Provides material specifications for nonferrous materials adequate for safety in the field of pressure equipment. These specirfications contain requirements for heat treatment, manufacture, chemical composition, heat and product analysies, mechanical test requirements and mechanical properties, test specimens, and methods of testing. They are designated by SB numbers and are derived from ASTM "B" specifications. Contents: Requirements for: Aluminum & Aluminum Alloys; copper & Copper Alloy, Plate, Sheet & Strip, & Rolled Bar; Copper & Copper Alloy Rod Bar & Shapes; Copper & Copper Alloy Pipe & Tubes; Copper Alloy Castings; Nickel & Nickel Alloy Plate, Sheet, and Strip; Nickel & Nickel Alloy Rod, Bar and Wire; Nickel & Nickel Alloy Pipe & Tubes; Nickel Alloy Castings; Nickel & Nickel Alloy Fittings; Titanium & Titanium Alloys; Zirconium & Zirconium Alloys. | |||||||
| ASME | S | ISBN-10: UO002B ISBN-13: | PGS: 1062 | List: 665.50 YOUR PRICE: 665.50 | |||
| ASME BOILER & PRESSURE VESSEL CODE 2007, Section II: Part C - Specifications for Welding Rods, Electrodes & Filler Metals | |||||||
|---|---|---|---|---|---|---|---|
| |||||||
| Provides material specifications for the manufacture, acceptability, chemical composition, mechanical usability, surfacing, testing requirements & procedures, operating characteristics, & intended uses for welding rods, electrodes & filler metals. These specifications are designated by SFA numbers and dare derived from AWS specifications. Contents: Requirements for: Steel & Steel Alloy Rods & Electrodes; Low Alloy Electrodes Rods & Filler Metals; Aluminum & Aluminum Base Alloy Rods & Electrodes; Nickel & Nickel Base Alloy Rods & Electrodes; Titanium & Titanium Alloy Rods & Electrodes; Zirconium & Zirconium Base Alloy Rods & Electrodes; Consumable Inserts; Brazing Filler Metals; Surfacing Rods & Electrodes; Filler Metal Procurement Guidelines. | |||||||
| ASME | S | ISBN-10: UO002C ISBN-13: | PGS: 770 | List: 665.50 YOUR PRICE: 665.50 | |||
| ASME BOILER & PRESSURE VESSEL CODE 2007, Section II: Part D - Properties (Customary) | |||||||
|---|---|---|---|---|---|---|---|
| |||||||
| Provides tables of design stress values, tensile & yield strangth values, & tables & charts of material properties. Facilitates ready identification of specific materials to specific Sections of the Boiler & Pressure Vessel Code. Provides appendices which contain criteria for establishing allowable stress, the bases for establishing external pressure charts, & information required for approval of new materials. Metric version available for the same price, Order No. U002DM. | |||||||
| ASME | S | ISBN-10: UO002D ISBN-13: | PGS: 374 | List: 665.50 YOUR PRICE: 665.50 | |||
| ASME BOILER & PRESSURE VESSEL CODE 2007, Section III: Division 1, Appendices | |||||||
|---|---|---|---|---|---|---|---|
| |||||||
| Contains appendices, both mandatory and nonmandatory for Section III, Division 1 & Division 2, including a listing of design & design analysis methods & information, & Data Report Forms. These appendices are referenced by and are an integral part of Subsections NCA through NG and Division 2. | |||||||
| ASME | S | ISBN-10: UO003A ISBN-13: | PGS: 560 | List: 550.00 YOUR PRICE: 550.00 | |||
| ASME BOILER & PRESSURE VESSEL CODE 2007, Section III: Division 1, Subsection NB - Class 1 Components | |||||||
|---|---|---|---|---|---|---|---|
| |||||||
| Contains requirements for the material, design, fabrication, examination, testing & overpressure protection of items which are intended to conform to the requirements for Class 1 construction. Covers the requirements for assuming the structural integrity of items. | |||||||
| ASME | S | ISBN-10: 079182876X ISBN-13: | PGS: 294 | List: 423.50 YOUR PRICE: 423.50 | |||
| ASME BOILER & PRESSURE VESSEL CODE 2007, Section III: Division 1, Subsection NC - Class 2 Components | |||||||
|---|---|---|---|---|---|---|---|
| |||||||
| Contains requirements for the material, design, fabrication, examination, testing & overpressure protection of items which are intended to conform to the requirements for Class 2 construction. Covers the requirements for assuming the structural integrity of items. | |||||||
| ASME | S | ISBN-10: UO003C ISBN-13: | PGS: 348 | List: 511.50 YOUR PRICE: 511.50 | |||
| ASME BOILER & PRESSURE VESSEL CODE 2007, Section III: Division 1, Subsection ND - Class 3 Components | |||||||
|---|---|---|---|---|---|---|---|
| |||||||
| Contains requirements for the material, design, fabrication, examination, testing & overpressure protection of items which are intended to conform to the requirements for Class 3 construction. Covers the requirements for assuming the structural integrity of items. | |||||||
| ASME | S | ISBN-10: UO003D ISBN-13: | PGS: 170 | List: 511.50 YOUR PRICE: 511.50 | |||
| ASME BOILER & PRESSURE VESSEL CODE 2007, Section III: Division 1, Subsection NE - Class MC Components | |||||||
|---|---|---|---|---|---|---|---|
| |||||||
| Contains requirements for the material, design, fabrication, examination, testing & overpressure protection of items which are intended to conform to the requirements for Class MC construction. Covers the requirements for assuming the structural integrity of items. | |||||||
| ASME | S | ISBN-10: UO003E ISBN-13: | PGS: 204 | List: 473.00 YOUR PRICE: 473.00 | |||
| ASME BOILER & PRESSURE VESSEL CODE 2007, Section III: Division 1, Subsection NF - Component Supports | |||||||
|---|---|---|---|---|---|---|---|
| |||||||
| Contains requirements for the material, desgin, fabrication, & examination of supports which are intended to conform to the requirements for Classes 1, 2, 3, & MC construction. Nuclear power plant supports for which rules are specified in this Subsection are thos metal supports which are designed to transmit loads from the pressure retaining barrier to the component of piping to the load carrying building structure. In some cases there may be intervening elements in the component support load path which are not constructed to the rules of this Seciton, such as diesel engines, electric motors, valve operators, coolers, & access structures. | |||||||
| ASME | S | ISBN-10: UO003F ISBN-13: | PGS: 208 | List: 473.00 YOUR PRICE: 473.00 | |||
| ASME BOILER & PRESSURE VESSEL CODE 2007, Section III: Division 1, Subsection NG - Core Support Structures | |||||||
|---|---|---|---|---|---|---|---|
| |||||||
| Contains requirements for the material, design, fabrication, & examination required in the manufacture & installation of core support structures. Core support structures are those structures or parts of structures which are designed to provide direct support or restraint of the core (fuel & blanked assemblies) within the reactor pressure vessel. | |||||||
| ASME | S | ISBN-10: UO003G ISBN-13: | PGS: 87 | List: 412.50 YOUR PRICE: 412.50 | |||
| ASME BOILER & PRESSURE VESSEL CODE 2007, Section III: Division 1, Subsection NH - Class 1 Components, Elevated Temperature Service | |||||||
|---|---|---|---|---|---|---|---|
| |||||||
| Contains requirements for materials, design, fabrication, examination, testing and overpressure relief of Class 1 components, parts, and appurtenances which are expected to function even when metal temperatures exceed those covered by the rules and stress limits of Subsection NB and Tables 2A, 2B, and 4 of Section II, PartD, Subpart 1. | |||||||
| ASME | S | ISBN-10: UO003H ISBN-13: | PGS: 202 | List: 473.00 YOUR PRICE: 473.00 | |||
| ASME BOILER & PRESSURE VESSEL CODE 2007, Section III: Division 2 - Code for Concrete Reactor Vessels & Containments | |||||||
|---|---|---|---|---|---|---|---|
| |||||||
| Contains requirements for the material, design, construction, fabrication, testing, examination, & overpressure protection of concrete reactor vessels & concrete containment structures, prestressed or reinforced. These requriements are applicable only to those components that are designed to provide a pressure retaining or containing barrier. They are not applicable to other support structures, except as they directly affect the components of the systems. | |||||||
| ASME | S | ISBN-10: UO0032 ISBN-13: | PGS: 264 | List: 539.00 YOUR PRICE: 539.00 | |||
| ASME BOILER & PRESSURE VESSEL CODE 2007, Section III: Division 3, Containment Systems & Transportation Packaging of Spent Nuclear | |||||||
|---|---|---|---|---|---|---|---|
| |||||||
| Contains the rulse of Division 3 constitute requirements fo rthe design and construction of the containment system of a nuclear spent fuel or high level radioactive waste transport packaging. | |||||||
| ASME | S | ISBN-10: UO0033 ISBN-13: | PGS: 208 | List: 539.00 YOUR PRICE: 539.00 | |||
| ASME BOILER & PRESSURE VESSEL CODE 2007, Section III: Subsection NCA - General Requirements for Division 1 and Division 2 | |||||||
|---|---|---|---|---|---|---|---|
| |||||||
| Provides requirements for the materials, design, fabrication, examination, testing, inspection, installation, certification, stamping, and overpressure protection of nuclear power plant components, and component and piping supports. Components include metal vessels and systems, pumps, valves, and core support structures. The components and supports coverd by this Section are intended to be installed in a nuclear power system which serves the purpose of producing and controlling the output of thermal energy from nuclear fuel and those associated systems essential to he functions and overall safety of the nuclear power system. This Section provides requiremnts for new construction and includes consideration of mechanical and thermal stresses due to cyclic operation. Deterioration which may occur in service as a result of radiation effects, corrosion, erosion, or instability of the material is not covered. Rules pertaining to the used of N, NPT, NA and NV code symbol stamps are also included. | |||||||
| ASME | S | ISBN-10: UO003R ISBN-13: | PGS: 134 | List: 511.50 YOUR PRICE: 511.50 | |||
| ASME BOILER & PRESSURE VESSEL CODE 2007, Section IV: Rules for Construction of Heating Boilers | |||||||
|---|---|---|---|---|---|---|---|
| |||||||
| Provides requirements for design, fabrication, installation & inspection of steam generating boilers, & hot water boilers intended for low pressure service that are directly fired by oil, gas, electricity, or coal. It contains appendices which cover approval of new material, methods of checking safety valve & safety relief valve capacity, examples of methods of calculation & computation, definitions relating to boiler design & welding, & quality control systems. Rules pertaining to use of the H, HV, & HLW Code symbol stamps are also included. | |||||||
| ASME | S | ISBN-10: UO0040 ISBN-13: | PGS: 296 | List: 440.00 YOUR PRICE: 440.00 | |||
| ASME BOILER & PRESSURE VESSEL CODE 2007, Section IX: Welding & Brazing Qualifications | |||||||
|---|---|---|---|---|---|---|---|
| |||||||
| Contains rules relating to the qualification of welding & brazing procedures as required by other Code Sections for component manufacture. It also covers rules relating to the qualification & requalification of welders, brazers, & welding & brazing operators in order that they may perform welding or brazing as required by other Code Sections in the manufacture of components. Contents: General Welding Requirements; Welding Procedure Qualificaitons¡; Welding Performance Qualifications; Welding Data; Welding Forms; General Brazing Requirements; Brazing Procedure Qulaifications; Brazing Performance Qulaifications; Brazing Data; Brazing Forms. | |||||||
| ASME | S | ISBN-10: UO0090 ISBN-13: | PGS: 336 | List: 495.00 YOUR PRICE: 495.00 | |||
| ASME BOILER & PRESSURE VESSEL CODE 2007, Section V: Nondestructive Examination | |||||||
|---|---|---|---|---|---|---|---|
| |||||||
| Contains requirements & methods for nondestructive examination which are referenced & required by other code Sections. Also includes manufacturer's examination responsibilities, duties of authorized inspectors & requirements for qualification of personnel, inspeciton & examination. Examination methods are intended to detect surface & internal discontinuities in materials, welds, & fabricated parts & components. Contents: Radiographic Examination; Ultrasonic Examination; Liquid Penetrant Examination; Magnetic Particle Examination; Eddy Current Examination of TUbular Products; Visual Examination; Leak Testing; Acoustic Emission Examination of Fiber-Reinforced Plastic Pressure Vessels. | |||||||
| ASME | S | ISBN-10: UO0050 ISBN-13: | PGS: 690 | List: 478.50 YOUR PRICE: 478.50 | |||
| ASME BOILER & PRESSURE VESSEL CODE 2007, Section VI: Recommended Rules for the Care & Operation of Heating Boilers | |||||||
|---|---|---|---|---|---|---|---|
| |||||||
| Covers general descriptions, terminology & operation guidelines applicable to steel & cast iron boilers limited to the operating ranges of Section IV Heating Boilers & includes guidelines for associated controls & automatic fuel burning equipment. Contents: Types of Boilers; Boiler & Boiler Room Accessories; Fuels; Fuel Burning Equipment & Burning Controls; Boiler Room Facilities; Operation, Maintenance & Repair of Hot Water Boilers & Hot Water Heating Boilers; Water Treatment. | |||||||
| ASME | S | ISBN-10: UO0060 ISBN-13: | PGS: 124 | List: 253.00 YOUR PRICE: 253.00 | |||
| ASME BOILER & PRESSURE VESSEL CODE 2007, Section VII: Recommended Guidelines for the Care of Power Boilers | |||||||
|---|---|---|---|---|---|---|---|
| |||||||
| Presented to promote safety in the use of stationary, portable, & traction type heating boilers. Provides such guidelines to assist operators of power boilers in maintaining their plants as safely as possible. Emphasis is placed on industrial-type boilers because of their extensive use. Contents: Fuels for Routine Operation; Operating & Maintaining Boiler Appliances; Inspection; Prevention of Direct Causes of Boiler Failure; Design of Installation; Operation of Boiler Auxiliaries; Control of Internal Chemical Conditions. | |||||||
| ASME | S | ISBN-10: UO0070 ISBN-13: | PGS: 172 | List: 253.00 YOUR PRICE: 253.00 | |||
| ASME BOILER & PRESSURE VESSEL CODE 2007, Section VIII: Division 1 - Pressure Vessels | |||||||
|---|---|---|---|---|---|---|---|
| |||||||
| Provides requirements applicable to the design, fabrication, inspection, texting & certification of pressure vessels operating at either internal or external pressures exceeding 15 psig. Such pressure vessels may be fired or unfired. Specific requirements apply to several classes of material used in pressure vessel construction, and also to fabrication methods such as welding, forging and brazing. It contains mandatory and nonmendatory appendices detailing supplementary design criteria, nondestructive examination and inspection acceptance standards. Rules pertaining to the use of the U, UM and UV Code symbol stamps are also included. Contents: Scope & Service Restrictions; General Requirements; Requirements for Fabrication by Welding, Forging or Brazing; Requirements Pertaining to Classes of Materials for Carbon & Low Alloy Steel; Nonferrous Materials; High Alloy Steel; Cast Iron; Clad & Lined Vessels; Cast Ductile Iron Vessels; Ferritic Steels with Tensile Properties Enhanced by Heat Treatment; Layered Construction; High Stresses at Low Temperatures. | |||||||
| ASME | S | ISBN-10: UO0081 ISBN-13: | PGS: 812 | List: 671.00 YOUR PRICE: 671.00 | |||
| ASME BOILER & PRESSURE VESSEL CODE 2007, Section VIII: Division 2 - Alternative Rules for Basic Coverage | |||||||
|---|---|---|---|---|---|---|---|
| |||||||
| Provides requirements applicable to the design, fabrication, inspection, texting & certification of pressure vessels operating at either internal or external pressures exceeding 15 psig. Such vessels may be fired or unfired. This pressure may be obtained from an external source or by the application of heat from a direct or indirect source, or any combination thereof. These rulse proved an alternative to the minimum requirements for pressure vessels under Division 1 rules. Incomparison the Division 1, Division 2 requirements on materials, design, and nondestructive examination are more rigorous; however, higher design stress intensify values are permitted. Division 2 rules cover only vessels to be installed in a fixed location for a specific service where operation and maintenance control is retained during the useful life of the vessel by the user who prepares or causes to be prepared the design specifications¡. These rules may also apply to human occupancy pressure vessels typically in the diving industry. Rules pertaining to the use of the U2 and UV Code symbol stamps are also included. Contents: General Requirements; Material Requirements; Design Requirements; Fabrication Requirements; Pressure Relief Devices; Inspection on Radiography; Testing; Marking; Stamping; Reports & Records. | |||||||
| ASME | S | ISBN-10: UO0082 ISBN-13: | PGS: 504 | List: 671.00 YOUR PRICE: 671.00 | |||
| ASME BOILER & PRESSURE VESSEL CODE 2007, Section VIII: Division 3 - Alternative Rules for High Pressure Vessels | |||||||
|---|---|---|---|---|---|---|---|
| |||||||
| Provides requirements applicable to the design, fabrication, inspection, testing, and certification of pressure vessels operating at eithe rinternal or external pressures generally above 10,000 psi. Such vessels may be fired or unfired. This pressure may be obtained from an external source, a process reaction, by the application of heat from a direct or indirect source, or any combination thereof. Division 3 rules cover vessels intended for specific service and installed in a fixed location or relocated from work site to work site between pressurizations. the operation and maintenence control is retained during the useful life o fthe vessel by the user who prepares or causes to be prepared the design specifications. Division 3 does not establish maximum pressure limits for either Section VIII, Divisions 1 or 2, nor minimum pressure limits for this Division. Rules pertaining to the use of the UV3 Code symbol stamps are also included. | |||||||
| ASME | S | ISBN-10: UO0083 ISBN-13: | PGS: 324 | List: 594.00 YOUR PRICE: 594.00 | |||
| ASME BOILER & PRESSURE VESSEL CODE 2007, Section X: Fiber-Reinforced Plastic Pressure Vessels(POLYMERS) | |||||||
|---|---|---|---|---|---|---|---|
| |||||||
| Provides requirements for construction of an FRP pressure vessel inconformance with a manufacturer's design report. It includes production, processing, fabrication, inspection, & testing methods required for the vessel. Section X includes two Classes of vessel design; class 1 a qualification through the destructive test of a prototype and Class II, mandatory design rules and acceptance testing by nondestructive methods. These vessels are not permitted to store, handle or process lethal vluids. Vessels fabrication is limited to the following processes: bag-molding, centrifugal casting and filament-windi¡ng and contact modling. General specifications for the glass and resin materials and minimum physical properties for the composite materials are given. Contents: General Requirements; Material Requirements; Design Requirements; Fabrication Requirements; Rules for Qualifying Design & Procedures; Pressure-Relief Devices; Rules Governing Testing, Inspection & Stamping Requirements. | |||||||
| ASME | S | ISBN-10: UO0100 ISBN-13: | PGS: 264 | List: 390.50 YOUR PRICE: 390.50 | |||
|
|
Your search found 62 books Now viewing Books 1 - 25 In stock items ship IMMEDIATELY. Other titles usually ship within 2-3 days. |
|
|---|
Browse Subject ISBN Search Table of Contents Search
Title and/or Author Search Publisher Search Advanced Search
|
|
|
| Location/Hours/General Info. | Ordering & Shipping | Search Techniques/Examples |
| Corporate Accounts | Government Buyers | Librarians |
| Universities & Colleges | Training Accounts | International Orders |
| Technical Books on these areas & more: | ||
|---|---|---|
| Computer | Business | Electronics |
| Engineering | Uniform & Code | Construction |
| Film & TV Industry | Legal | Medical |
| Recording Industry | Math & Science | Classic & Out-Of-Print Titles |
Opamp Technical has one of the largest selections of technical books in the country. Our bookstore was started over 20 years ago. We supply all types of professional & educational technical books to individuals, government agencies, schools, corporate libraries, & many industries.
|
|
|
|
|
|
OPAMP Technical Books
1033 N. Sycamore Avenue
Los Angeles, California 90038
USA
800-468-4322 / 323-464-4322 FAX
323-464-0977
Copyright © 1997-2007 Opamp Technical Books, Inc.